• 
• 
• 
• 
• 
• 
• 
• 

Variations	90° & 45° Socket-weld & Threaded Female-Female - Male-Female - Male-Male
Standards	ASTM A182 - ASME SA182 - 'Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings' ASME B16.11 - 'Forged Fittings, Socket - Welding and Threaded' MSS SP-43 - 'Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications'
Dimensions	Diameter : 1/8" à 4" Pressure class : 3000# & 6000# See detailed dimensions

Notes

In addition to standard-size parts from stock, FloWell offers a range of complementary services:

Manufactured (from hollows)	Thanks to our production facility, we can manufacture these parts from hollows. Large quantities or a single part, we adapt to your needs.See the data sheet of this service
Filleted	We can make all kinds of threads (NPT, BSP-P, BSP-T ...), to meet needs and use requirements. See the data sheet of this service
Specific Marking and Packaging	Each item or part has a unique identifier and  is specifically packaged to meet the customer’s needs... We adapt to your requestSee the data sheet of this service
Upgrading	The parts we have in stock are usually delivered with a 3.1 certificate. Depending on what you need, we can perform the tests required to issue a 3.2 certificate, or a CMTR in accordance with the ASME III Code. See the data sheet of this service

SocketSSSSSSssssvsfbsd
Elbows Socket-Weld      -      Elbows Threaded

---

#NPT

Elbows 90° & 45° SW 3000Lbs
Nominal Pipe Size	Socket Bore Diameter2 (B)	Bore Diameter2 (D)	Socket Wall Thickness1  (C)	Body Wall3 (G)	Depth of Socket3 (J)
			1/8"	11.2 10.8	7.6 6.1	3.18 3.18	2.41	9.5
		1/4"	14.6 14.2	10.0 8.5	3.78 3.30	3.02	9.5
3/8"	18.0 17.6	13.3 11.8	4.01 3.50	3.20	9.5
1/2"	22.2 21.8	16.6 15.0	4.67 4.09	3.73	9.5
3/4"	27.6 27.2	21.7 20.2	4.90 4.27	3.91	12.5
1"	34.3 33.9	27.4 25.9	5.69 4.98	4.55	12.5
1 1/4"	43.1 42.7	35.8 34.3	6.07 5.28	4.85	12.5
1 1/2"	49.2 48.8	41.6 40.1	6.35 5.54	5.08	12.5
2"	61.7 61.2	53.3 51.7	6.93 6.04	5.54	16.0
2 1/2"	74.4 73.9	64.2 61.2	8.76 7.67	7.01	16.0
3"	90.3 89.8	79.4 76.4	9.52 8.30	7.62	16.0
4"	115.7 115.2	103.8 100.7	10.69 9.35	8.56	19.0
Elbows 90° & 45° SW 6000Lbs
Nominal Pipe Size	Socket Bore Diameter2 (B)	Bore Diameter2 (D)	Socket Wall Thickness1  (C)	Body Wall3 (G)	Depth of Socket3 (J)
			1/8"	11.2 10.8	4.8 4.2	3.96 3.43	3.15	9.5
		1/4"	14.6 14.2	7.1 5.6	4.60 4.01	3.68	9.5
3/8"	18.0 17.6	9.9 8.4	5.03 4.37	4.01	9.5
1/2"	22.2 21.8	12.5 11.0	5.97 5.18	4.78	9.5
3/4"	27.6 27.2	16.3 14.8	6.96 6.04	5.56	12.5
1"	34.3 33.9	21.5 19.9	7.92 6.93	6.35	12.5
1 1/4"	43.1 42.7	30.2 28.7	7.92 6.93	6.35	12.5
1 1/2"	49.2 48.8	34.7 33.2	8.92 7.80	7.14	12.5
2"	61.7 61.2	43.6 42.1	10.92 9.50	8.74	16.0
2 1/2"	74.4 73.9	- -	- -	-	16.0
3"	90.3 89.8	- -	- -	-	16.0
4"	115.7 115.2	- -	- -	-	19.0

¹ The lower and upper values for each dimension are respectively the average and minimum thicknesses required. The average thickness cannot be lower than the value mentioned. The minimum values are allowed in limited areas.
² The lower and upper values for each dimension are respectively the minimum and maximum tolerances.
³ The values mentioned are minimum dimensions accepted.

The dimensions are in millimeters
Source : ASME B16.11 - 2009

---

Elbows 90° & 45° Threaded 3000Lbs
Nominal Pipe Size	Center to End (A)		Outside  Diameter  (H)	Minimum Wall Thickness (G)
	90°	45°
	1/8"	21			17	22	3.18
1/4"	25	19			25	3.30
3/8"	28	22	33	3.51
1/2"	33	25	38	4.09
3/4"	38	28	46	4.32
1"	44	33	56	4.98
1 1/4"	51	35	62	5.28
1 1/2"	60	43	75	5.56
2"	64	44	84	7.14
2 1/2"	83	52	102	7.65
3"	95	64	121	8.84
4"	114	79	152	11.18
Elbows 90° & 45° Threaded 6000Lbs
Nominal Pipe Size	Center to End (A)		Outside  Diameter  (H)	Minimum Wall Thickness (G)
	90°	45°
	1/8"	25			19	25	6.35
1/4"	29	22			33	6.60
3/8"	33	25	38	6.98
1/2"	38	28	46	8.15
3/4"	44	33	56	8.53
1"	51	35	62	9.93
1 1/4"	60	43	75	10.59
1 1/2"	64	44	84	11.07
2"	83	52	102	12.09
2 1/2"	95	64	121	15.29
3"	106	79	146	16.64
4"	111	79	152	18.67

The dimensions are in millimeters
Source : ASME B16.11 - 2009 

Back to info